Powis Parker FastBack Model 11 Manual do Utilizador Página 8

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 17
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 7
MODEL 11 USERS MANUAL 7
III BINDING WITH THE FASTBACK
®
MODEL 11
1. Turn power switch “On”. The machine will warm up and will be ready
for use in 3 – 4 minutes.
2. The Book Clamps will open when the machine is ready for use.
3. Tap the pages on the top of the machine to ensure that the edges of
the paper are even.
4. Place the document in the opening and slide the document to the right
(figure 3).
5. Press the big green Bind Button (figure 4). The Book Clamps will close.
6. Insert the Binderstrip
into the Binderstrip
Guide at the right side of the
machine (figure 5), until the machine grasps it and draws it in.The strip
will automatically position itself on the document for the optimum bind.
7. Binding. When the binding process is complete, the Book Clamps will
open.
8. Remove the bound document and place it spine down in the Cooling
Rack (figure 6). Allow it to cool for approximately 5 – 7 minutes.
NOTE
: In case of misaligned or misplaced sheets, before inserting a
Binderstrip
, press the Bind Button a second time to unclamp the document.
If your document is too thick for the machine the Book Clamps will re-open
automatically and the left Status Indicator Light will blink red.
NOTE
: Do not open the document before it has time to cool.
CAUTION: Use of non-compatible binder
strips will result in malfunction of the
machine and possible severe leakage of
adhesive. We strongly advise using only
Fastback
®
brand Binderstrips
. Failure to do
so may void any warrantee.
ABOUT THE KEY OPERATORS
MANUAL: Special functions, cleaning
instructions and information about how to
remove a jammed Binderstrip
are explained in
the Key Operator’s Manual.
DIAGRAMA/ SCHÉMA/ FIGURE 3
DIAGRAMA/ SCHÉMA/ FIGURE 4
DIAGRAMA/ SCHÉMA/ FIGURE 5
DIAGRAMA/ SCHÉMA/ FIGURE 6
Vista de página 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

Comentários a estes Manuais

Sem comentários